Here are the supplies that I used. My paper cutter, cutting mat, A2 size card, transparency, small Cuttlebug folders, Tombow multi-purpose glue, and Fiskars fingertip cutter. Not pictured in the photo below due to oversight, my Scor-It. Oops! You'll see it in several shots later though. It makes a wonderful backdrop for taking photos besides being a super scoring tool. :-)
One idea that interested me was cutting the folder apart. That way the design could be placed anywhere on a card front. As you can see below, even on an A2 size card, placement of the embossed design can be limited. Don't think about putting it in the center. You can't.
If you cut the folder open, you can do it though. So, I took my set of Stitched Circles to serve as illustration. First I did a CB folder no-no and opened that folder as far as it would go. I wanted the hinged part to bend back and away from the inside of the folder. Then I worked that plastic hinge back and forth a few times. One snapped on its own. For the others I used my craft knife, cutting from the inside. I mention this because I didn't want to leave any rough edges on the inside of the folder that might show up when embossing. You could always trim or file them, but I like easy.
The next problem was coming up with a way to have these two separate pieces meet up the way that they're supposed to. I try to eliminate the guesswork when possible and make things more foolproof. This step had me stumped for a while until I saw someone mention acetate, like the kind used with Sizzix folders. Aha! Now we're getting somewhere!
Up above are four 2" by 11 1/4" strips of transparency. These are cut from a heavier weight transparency. They used to be a GBC Clear Presentation Cover. The ever-resourceful and very creative Sue Nelson of Heart Prints found these a while back. They're wonderful for making gift boxes and are a great weight for making transparent cards. I found these at an office supply store. I used them here because I wanted something fairly sturdy that would bring the two sides back together properly. The 2" dimension is the width of a CB folder. I just went with the transparency's original length.
Up above you can see the score that I made with my Scor-It at the halfway point of each strip. If this was cardstock I'd have folded the card so that the opening was away from me, but I just went ahead and folded the two ends toward me. It just seemed to work better. Those are now ready to go.
Okay, so I cut all of the folders open. I laid them so that the insides of the folders, the embossing surfaces, were face down. I placed a small dab of the Tombow multipurpose glue at the corners and smeared it around. I wanted something that wasn't necessarily going to be permanent. I also wanted something that would be fairly flat so that it wouldn't cause any problems with embossing. I let it dry until clear. It just took a minute or two.
Here I've opened up one of my folded transparencies and I'm placing the side with the glue down onto the transparency at the edge opposite the fold.
With the folder still open and the first side in place, I placed the other half of the embossing folder on top of the first so that it would be just where it needed to go when embossing. I then let the other free side of the transparency close on top of that and pressed down gently on the corners so that the glue would stick.
And there's my finished folder.
You can see that I can now place the design in the center of the card if I want to.
I can center it along the folded edge.
I had to use a different folder here to say that I can tilt my design at a diagonal if I want to and place it anywhere on the card front. Heheheh, circles don't have diagonals, eh? But that's why I left the transparency at its original length. It just maximizes the reach that the folder has, and it still positions both sides of the folder so that they'll meet properly to emboss the design.
And here you can see that I've embossed a stitched circle at the center of the card front. There are no folder lines either. The heftier transparency does add some thickness. On my Big Shot I used Tab 2 instead of not using any tabs at all--this made my platform slightly thicker than usual when running embossing folders through my machine. But I also removed one of the clear plates, so my stack was actually thinner than usual. The embossing came through just fine though there was very little pressure applied. This is a case where less is better!
There you see the finished folders and the example on the card. Hope this might help make those small CB folders a bit more versatile.
