embossed shape outlines on the cheap

Last week on the Gingerwood stamping forum we were talking about do-it-yourself embossing folders. Folks with Cricuts were improvising and embossing shapes similar to the Spellbinders Nestabilities shapes. The only drawback was that they said that they couldn't emboss the border of a die cut the way that you can with a Nesties die cut. I got to thinking about this, and I thought, well, why not? They can cut out frames--a 1/4" wide frame could give the same effect as a die cut with an embossed border. Now, someone may have done this already with their Cricut. I don't have one, so I don't follow those blogs or forums, but I thought that those of us who don't have an electronic die cutter for whatever reason shouldn't be left out. LOL!

I've made DIY embossing folders before. This time I wanted to see if I could emboss the outline of a shape--something similar to an embossed Nestabilities die cut look. I was gonna do it on the cheap, too. No Cricut. Hm, but how....

I knew that I'd make it out of chipboard. I needed a way to make an open frame in some kind of shape. I don't have one of those nifty tracing tools that will trace a design in a smaller or larger size. Wouldn't that have been cool! But hey, I thought of something that might work! So simple, too.


This is an octagon that I printed out on computer paper. Spellbinders will be offering an octagonal set of Nestabilities dies soon, but they aren't available yet for most of us.


I cut out my octagon.


This is my cut out shape laid on top of chipboard which I'd received courtesy of the USPS with a stamp order. Love to recycle!


I cut out shape from the chipboard.


Here is my makeshift tracer! Yep, two colored pencils held together by a rubber band. Woo! High tech stuff! You don't see this just anywhere! ;-)


Time to trace the inside border of my frame. One pencil rests on the chipboard, and the other one rides along the outside edge of the shape. I have that piece of scrap paper underneath so that I don't trace an octagon on my table.


Pull the pencils along one edge, like so. Then do the same for the other edges.


Here is my shape with all of the edges traced.


Now it's time to cut along the marks with my ruler and craft knife.


When I was finished it looked like this. Gee, aren't you glad that I'm not into making videos? No need to watch some of the more tedious parts of the procedure. LOL! But more seriously, that's why I use photos. It's like those cooking shows where they put a cake in the oven, then turn around and pull out the one that's all baked and ready for the next step. Some videos drive me nuts when they take almost 10 minutes to describe what they're doing and there's no good way to skip ahead. ARGH! But I digress.... :-)


This is my cut out shape (frame) which is on top of my multipurpose platform open to Tab 1, black silicone embossing pad, and card front. I placed my clear cutting plate and the backing from a Cuttlebug folder package as a shim on top of all of that, then ran the stack through. If you have an impressions pad, you probably could use that instead of the clear plate and shim.


This is the embossed border on the card front. It's not as crisp as what you'd get with Nesties, but it's not bad for a different, softer look. It's definitely not bad when you consider my materials, i.e. recycled chipboard, two pencils, a rubberband, a craft knife, a cutting mat, and a ruler. I think it took me longer to write up this blog post than to make it, too. :-)


And here is that border used as an accent on a card. The stamp is from My Favorite Things and stamped and colored using Memento dye inks and markers. I embellished the flowers with a bit of Flower Soft to add dimension.